1.Types of aluminum alloy doors and Windows
Aluminum alloy doors and Windows, refers to the use of aluminum alloy extruded profiles for the frame, elevator, fan material made of doors and Windows called aluminum alloy doors and Windows, referred to as aluminum doors and Windows. Aluminum alloy doors and Windows include aluminum alloy as a force rod (bear and transfer the weight and load of the rod) base material and wood, plastic composite doors and Windows, referred to as aluminum wood composite doors and Windows, aluminum-plastic composite doors and Windows.
1. According to the material and function of doors and Windows, it can be roughly divided into the following categories: wood doors and Windows, steel doors and Windows, revolving door security doors, automatic doors, plastic doors and Windows, revolving doors, iron doors and Windows
Plastic steel doors and Windows, stainless steel doors and Windows, aluminum alloy doors and Windows, glass steel doors and Windows. People’s living standards continue to improve, the types of door descent and its derivative products continue to increase, and the grade is gradually rising
For example, heat-insulating aluminum alloy doors and Windows, wood-aluminum composite doors and Windows, aluminum-wood composite doors and Windows, solid wood doors and Windows, solar energy houses, glass curtain walls, wooden walls and so on.
2. According to the opening method can be divided into: flat open, split open, push and pull, fold, up, and so on.
3. Classification by material; Wood doors and Windows, steel doors and Windows, revolving doors, automatic doors, plastic doors and Windows, revolving doors, iron doors and Windows, plastic steel doors and Windows, stainless steel doors and Windows, aluminum alloy doors and Windows
Windows, glass steel doors and Windows, aluminum wood composite doors and Windows.
How to make aluminum doors and Windows
1. the processing and production of broken bridge aluminum doors and Windows should be carried out in the factory, not made on the construction site, and the production of doors and Windows should meet the design and installation and acceptance requirements of the broken hot aluminum alloy door
Hot-break aluminum alloy door and window frame should be firmly installed doors and Windows should be pushed and pulled, open flexibly, there should be water drainage holes at the windowsill, and a limiting device should be set. Fasteners shall comply with the relevant technical regulations
To be sure; Hardware models, specifications and performance shall comply with the provisions of the current national standards.
2. The processing of the drainage hole on the sliding window slide should follow the principle of the inner fan outside the hole and the outer fan inside the hole to ensure the sealing performance of the door and window, especially the horizontal push and pull of the lower transverse to 3. before the assembly of the broken bridge aluminum doors and Windows, the end processing burrs should be removed, the end nodes and the joint part of the profile must take waterproof sealant and other sealing measures to prevent water seepage of the structure.
4. the structural assembly of the hidden frame window must be made and maintained in the purified room. Dust, oil stains and other dirt on the bonded surfaces of glass and aluminum frames must be removed with solvents; every
Clean a component or a piece of glass, should be replaced with a clean dry wipe; The solvent should be poured on the cloth, and the cloth should not touch the solvent bottle mouth. Glue injection must be full, no bubbles
Leakage, glue seam surface should be smooth; The remaining glue of the glue seam shall not be reused.
